 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| L42 / SML42 Thin Film Limiter Module 50 to 4000 MHz Features Rev. V2 * VERY WIDE BANDWIDTH * GOOD SUPPRESSION OF EVEN ORDER HARMONICS * LOW INSERTION LOSS: 3.5 dB (TYP.) Description The L42 signal limiter is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This design uses Schottky bridge quad and anti-parallel diodes, which provide consistent limiting levels over a broadband frequency range. Both TO-8 and SMTO-8 packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Product Image Ordering Information Part Number L42 SML42 CL42 ** Package TO-8 Surface Mount SMA Connectorized ** The connectorized version is not RoHs compliant. Electrical Specifications: Z0 = 50, VCC = +15 VDC Parameter Frequency (min) Insertion Loss @ PIN < -20 dBm (max.) 50-3000 MHz 3000-4000 MHz Input VSWR (max.) PIN < -10 dBm, +10 < Bias < +20 Vdc Output VSWR (max.) PIN < -10 dBm, +10 < Bias < +20 Vdc Output Limiting Level @ PIN = +20 dBm (max.) +15 < Bias < +20 Vdc 50-2000 MHz 2000-4000 MHz Bias Current (max.) @ +20 Vdc @ +15 Vdc @ +10 Vdc Absolute Maximum Ratings Guaranteed Parameter Absolute Maximum -62C to +125C +125C +25 V +20 dBm 400 mW 1W +125C Units MHz dB dB Typical 25C 5-4000 3.5 4.0 1.6:1 0 to 50C -54 to +85C* 50-4000 4.5 5.0 1.9:1 50-4000 Storage Temperature 5.0 6.0 2.1:1 Case Temperature DC Voltage Continuous Input Power Short Term Input power (1 minute max.) Peak Power (3 sec max.) "S" Series Burn-In Temperature (case) 2.0:1 2.3:1 2.5:1 dBm dBm mA mA mA 2.5 6.5 8.5 7.0 4.0 4.0 7.0 9.0 4.5 7.5 10.0 * Over temperature performance limits for part number CL42, guaranteed from 0oC to +50oC only. Limiting and Insertion Loss Characteristics at +25C Bias Voltage +20 Volts +15 Volts +10 Volts +5 Volts 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Output Level at Limiting Threshold (1 dB comp.) Typical 1000 MHz 2500 MHz 4000 MHz -1.0 dBm -2.5 dBm -6.0 dBm -2.0 dBm -5.5 dBm -12.0 dBm -4.0 dBm -7.0 dBm -13.8 dBm -6.2 dBm -7.8 dBm -12.0 dBm L42 / SML42 Thin Film Limiter Module 50 to 4000 MHz Typical Performance Curves at +25C Rev. V2 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. L42 / SML42 Thin Film Limiter Module 50 to 4000 MHz Typical Performance Curves at +25C Outline Drawing: TO-8 * Rev. V2 WEIGHT: 1 gram (0.04 oz.) max Outline Drawing: Surface Mount * WEIGHT: 1 gram (0.04 oz.) max Outline Drawing: SMA Connectorized * WEIGHT: 19 grams (0.67 oz.) max 3 Dimensions are inches (millimeters) 0.015 (0.38) unless otherwise specified. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of L42
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |